Enviar mensagem
Casa
Produtos
Sobre nós
Excursão da fábrica
Controle da qualidade
Contacte-nos
Pedir um orçamento
Notícia
guangqing(anhui)gas technologies co.,ltd.
Casa ProdutosJogos de reparação de IMPCO

Jogos de reparação de RK PEV IMPCO para o regulador de duas fases

China guangqing(anhui)gas technologies co.,ltd. Certificações
China guangqing(anhui)gas technologies co.,ltd. Certificações
Estou Chat Online Agora

Jogos de reparação de RK PEV IMPCO para o regulador de duas fases

RK PEV IMPCO Repair Kits For Two Stage Regulator
RK PEV IMPCO Repair Kits For Two Stage Regulator

Imagem Grande :  Jogos de reparação de RK PEV IMPCO para o regulador de duas fases

Detalhes do produto:
Lugar de origem: EUA
Marca: IMPCO
Número do modelo: RK-COBRA
Condições de Pagamento e Envio:
Quantidade de ordem mínima: 24
Preço: Depending on quantity
Detalhes da embalagem: Caixa
Tempo de entrega: 8 semanas
Termos de pagamento: T/T
Habilidade da fonte: 1200pcs por 8weeks
Descrição de produto detalhada
Nome do produto: Jogo de reparação número da peça: RK-PEV
Tipo: IMPCO Diafragma: Hydrin (preto); Silicone (amarelo); Fluorosilicone (azul)
Realçar:

Jogos de reparação de RK PEV IMPCO

,

2 jogos de reparação do regulador IMPCO da fase

IMPCO RK-PEV , Two-Stage Regulator EV / PEV Repair Kit , Color Coded Diaphargms
 
MODEL EV & PEV SERIES
TWO-STAGE REGULATOR REPAIR KIT INSTRUCTIONS
Important: Any maintenance, service or repair should be performed by trained and experienced service technicians. Proper tools and equipment should be used to prevent injury to the servicing technician, property or system components. Service repairs should always be performed in a safe environment and the technician should always wear protective clothing to prevent injury.
The IMPCO PPI-47 repair kit instructions will provide the technician information to successfully repair the model EV and PEV regulators. Always inspect the major casting pieces for damage, corrosion or cracks before attempting a service repair. Be sure the repair kit part number you are using is correct for the regulator being serviced. Diaphragms are color coded and have different performance characteristics:
BLACK: Hydrin diaphragm material is the standard material and is well suited for the most common applications.
YELLOW: Silicone diaphragm material is the optional upgrade material that provides excellent flexibility in cold weather climates and is more resistant to chemical contamination.
BLUE: Fluorosilicone diaphragm material provides excellent high and low temperature durability with increased chemical resistance. This material is recommended for turbo applications.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 0
 
 
REBUILD INSTRUCTIONS
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 1
1. Under normal conditions, installation of a complete repair kit should be necessary only at the time of a major engine overhaul or when the converter has been out of service for an extended period of time. Each kit includes the necessary gaskets, diaphragms, seals and some replacement screws.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 2
2. PEV Only (Skip for EV): Remove the spring retainer housing cover screws (23) and cover (24). Remove the housing gasket (25) and secondary spring (7).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 3
3. Remove the cover screws (2) and the cover (3) from the regulator.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 4
4. Remove the secondary diaphragm assembly (4).
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 5
5. Remove screws (10) from the primary diaphragm cover (11).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 6
6. Early Model Only (Skip for Later Models): Remove secondary lever fulcrum pin (8) and secondary lever (5).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 7
7. Later Model Only (Skip for Early Model): Remove the screw (21) and washer (22) holding the fulcrum pin (8).
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 8
8. Remove primary cover (11) and primary springs (12).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 9
9. Remove primary diaphragm (13).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 10
10. Remove primary pin (14).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 11
11. Remove remaining screws from main body (10).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 12
12. Separate upper main body (15) from lower body (18).
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 13
13. Remove body gasket (16).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 14
14. Remove primary seat (17).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 15
15. Install new primary seat (17) to lower body (18) with rubber face down towards the primary orifice.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 16
16. Install new gasket (16) to main body. Be sure to align the gasket as shown using the dowels and primary pin channel to retain the gasket.
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 17
17. While holding the outer edges of the main body gasket (16), place the upper body (15) on top of the lower body (18) with seat installed. Align the screw holes and be sure the gasket is flat around the circumference of the body.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 18
18. Install the screws (10), and tighten them until they are snug, to retain the two pieces for now.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 19
19. Install new primary pin (14).
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 20
20. Install new primary diaphragm (13) using dowel locators to align and retain as shown.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 21
21. Install primary springs (12) using spring locators to align and retain as shown.
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 22
22. Press primary cover (11) in place over the primary springs (12) and diaphragm assembly (13). Insert the two inner screws (9) in the location shown and torque to 22-28 in-lbs. (2.5-3.2 Nm).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 23
23. Early Models: Replace and tighten screws (10) except for the one shown in left photo. Starting at one side of the regulator body, use a diagonal pattern to torque each screw (10) to 35-45 in-lbs. (4.0-5.1 Nm).
Later Models: Replace and tighten screws (10). Starting at one side of the regulator body (15), use a diagonal pattern and torque all screws (10) to 35-45 in-lbs. (4.0-5.1 Nm).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 24
24. Slide the pin through the larger of the two hole openings of the lever (5) and place over a socket that will support the area of the lever around the hole. Using a hammer, knock in the pin (26) through the smaller hole until it is even on both sides.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 25
25. Inspect the tabs on the lever (5) to verify they are not bent and the pin (26) is centered.
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 26
 
26. Insert the seat (6) by pressing the nub through the hole in the lever (5).
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 27
27. Early Models Only (Skip for Later Models): Replace the secondary lever and seat assembly (5 & 6) and fulcrum pin (8).
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 28
28. Later Models Only (Skip for Early Models): Insert the screw (21) and washer (22) securing the fulcrum pin (8). Secure the screw until snug.
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 29
29. Check secondary lever height. While holding the secondary seat (5) lightly against the secondary orifice. Measure the distance using a straight edge between the top of the lever pin and body casting edge. The lever height must be set to 1/32 of an inch (2.4mm) below the top of the casting. If the lever height is incorrect, continue to Step 30. Once the lever height is correct, skip to Step 31.
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 30
30. If necessary, remove the fulcrum pin (8) and lever (5) and bend slightly if required. Do not attempt to bend the lever when installed--unnecessary force on the lever may damage the secondary seat (6).
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 31
31. Early Models: Once the lever height is correctly set, replace the remaining screw (10) and torque to 35-45 in-lbs. (4.0-5.1 Nm).
Later Models: Remove screw (21) and washer (22). Apply Loctite 242 to screw threads and torque to 17-23 in-lbs. (1.9-2.6 Nm). Refer to photo in Step 28.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 32
32. EV Only (Skip for PEV): Slip the spring (7) under the secondary lever (5) making sure it is retained by the two tabs at the sides and the single tab punched through the top of the lever.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 33
33. Replace the secondary diaphragm (4) engaging the slotted link to lever pin shown.
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 34
34. Install the cover (3) to the body aligning the screw holes. Install screws (2) finger tight, then torque to 25-35 in-lbs. (2.8-4.0 Nm), using a diagonal pattern.
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 35
35. PEV Only (Skip for EV): Place the secondary spring (7) on the secondary diaphragm (4) perch. Install the gasket (25).Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 36
36. PEV Only (Skip for EV): Align the spring retainer housing screw holes to the cover (3) and insert cover screws (23). Torque to 7-11 in-lbs. (0.8-1.2 Nm).
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 37
37. EV Only: Apply 100 psi (6.9 Bar) of air pressure to the inlet side of the regulator and test for leaks. Draw a soap bubble across the regulator outlet to verify that no air is flowing through the outlet. If air escapes, the rebuild has failed and the regulator must be replaced. Actuate the primer button and the soap bubble should burst and air flow should be noted at the regulator outlet. Use soap and/or a commercial leak detector solution to inspect the gasket seals around the perimeter of the converter for leaks. If no leaks are found, the repair is now complete.
 
Jogos de reparação de RK PEV IMPCO para o regulador de duas fases 38

 
 
 
 

Contacto
guangqing(anhui)gas technologies co.,ltd.

Pessoa de Contato: carrie

Telefone: +8613956066665

Envie sua pergunta diretamente para nós (0 / 3000)